The reference stamped inside this case describes the watch before the dial does. Under the reference system Omega adopted in 1962, the first three digits of a case number spell out what kind of watch it is, and the Omega 511.238 decodes cleanly: 5 for a lady’s watch, 1 for manual winding without a seconds hand, and 1 for a case that was not made to be water-resistant. The dial agrees, with two hands and nothing else to read.
The movement that fits that brief is caliber 484, a hand-wound, 17-jewel Omega movement of the 1960s that measures 12.5 by 15.5 millimeters and 3.2 millimeters thick. Even its long side is shorter than the 17.91-millimeter width of a U.S. dime. It drives only the hour and minute hands, and a turn of the crown each day is all it asks.
Omega did not save the 484 for its modest watches. The company fitted the same caliber to ladies’ watches in solid 18k gold, and it turns up across other 511 references of the period, including a square steel 511.162. The 511.238 itself was also made with a gold-plated case. This one is the stainless steel edition.
A small C.B in a rounded frame is stamped inside the back, beside ACIER INOXYDABLE and the reference. It is the mark of La Centrale, the case factory in Bienne that Louis-Paul Brandt, son of Omega’s founder Louis Brandt, started in 1896 to make cases for the family’s watches. The same initials appear inside some Speedmaster Professional 105.012 cases of the later 1960s, where collectors know them as CB cases.
The dial is silver with a sunburst finish, fine rays brushed outward from the center that move the light around the field as the wrist turns. An applied Omega symbol sits above the printed name, and the baton markers are filled dark at their centers. The steel case has a plain fixed bezel and a fluted crown.
From outside, the back is a plain brushed steel disc within a polished rim. Its inner face also carries the Omega name and symbol in a triangle, with SWISS MADE and FAB. SUISSE. Under that back, the 484 has copper-toned bridges stamped OMEGA WATCH Co and SWISS, with the caliber number beside another Omega symbol.
The grained black leather strap is printed underneath in gold with OMEGA and SWISS MADE. Its steel buckle has a raised Omega symbol on the front, with SWISS and ACIER INOX. stamped on the back beside a small shield. At 18 by 24 millimeters, the case wears as a small watch.
The reference stamped inside the back had already said as much.
